Hi there,Try "qualify=3000" which will increase the time between checks.. Although it sounds like there is more to this problem than just increasing the time..
I still have issues with the IAX connection between two servers (one static (server A), one dynamic (server B), none behind NAT):
B registers with A, and "iax2 show registry" shows that everything is fine. However, after a while if I check on server A with "iax2 show peers" I see a status of UKNOWN (in iax.conf there is a qualify=yes statement for server B).
The problem is that the connection to server B regularly gets worse than 2000 ms and is thus temporarily listed as unavailable - fine so far, that is correct. But at some point server A stops to pick up the working (!) connection and permanently shows status UNKOWN although the connection is fine again (40 ms or so). It does help to issue a "reload" on server A, but that's for sure not the way it should be... without that "reload" server B will be permanently unavailable.
Has anyone else seen this? Suggestions?
Cheers, Philipp
Later..
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
