Of course it does provide quite descent hangup notification (425Hz 200ms
200ms envelope for 40s), but it is asterisk/digium that in about 5%
fails to detect it. I have trie to alter Tx, Rx gain and I even change
the busy counter to value 2. Normaly it does detect hangup in about 2
seconds but for whatever reason in about 5% it fails to do so. After
40sec of hangup notification telecom also provides current off
notification but I donb't know how to instruct asterisk to also detect this.
.
Tzafrir Cohen pravi:
On Tue, Nov 28, 2006 at 07:13:38PM +0100, Matic wrote:
Hi,
I have a small problem with tdm2400 with tone detection. About 5% of all
calls doesn't end because Asterisk dosen't detect "busy" tone on remote
hangup. I know that board does support current reversal and current off,
but how do I configure asterisk to use tone detection first and if that
should fail, current off detection which my operator support (40 sec
after remote hang up).
Just for the record: which telco is it? Doesn't it provide decent hangup
notification?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
