Hi Vincent -
Here's what I did on the X-Lite at home in the Topology section:
IP address : Discover global address
STUN server : Discover server
Port used on local computer : Manually specify range 8000-8019
Here are the ports that I forwarded from my NAT router at home:
UDP 5060
UDP 3478 (STUN; needed?)
UDP 8000 to 8019
Is there something else I should do, either on my home setup or at work on
the NAT router or Asterisk?
Just to double check - have you limited the RTP ports on the asterisk
server to 8000-8019 (in rtp.conf)?
Also, Xlite uses (or used to use) a silence suppresion mechanism that
doesn't work too well with asterisk. According to the WIKI:
Turn off Silence Supression (to avoid RFC3389 warnings on Asterisk console):
Menu | Advanced System Settings | Audio Settings | Silence Settings |
Transmit Silence: Yes
- Noah
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
