You may want to give a try to this document I wrote about mfcr2 with Asterisk.
http://moy.ivsol.net/unicall/mfcr2-asterisk-unicall-0.2-english.pdf Regards On 11/24/06, Alyed Tzompa <[EMAIL PROTECTED]> wrote:
Hello! I'm tryuing to bring up an R2 connection but eventhough I've followed the guidelines in: http://zarzamora.com.mx/asterisk/17 something seems to be missing. When an incomming call is generated I get: Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 <- 0001 [1/ 1/Idle /Idle ] Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 Detected Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 Making a new call with CRN 32771 Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 1101 -> [2/ 2/Idle /Idle ] Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:2672 handle_uc_event: Unicall/24 event Detected and that's it, afterwards just a busy tone and the telco guy says the channel turns "sealed". When I try an outbound call I get: -- Attempting call on Unicall/g2/12345678 for [EMAIL PROTECTED]:1 (Retry 1) Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 Call control(1) Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 Make call Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 Making a new call with CRN 32769 Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 0001 -> [1/ 1/Idle /Idle ] Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:2672 handle_uc_event: Unicall/24 event Dialing Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 seize_ack_wait_expired Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 R2 prot. err. [1/ 40/Seize /Idle ] cause 32776 - Seize ack timed out Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 1001 -> [1/ 1/Idle /Idle ] Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:2672 handle_uc_event: Unicall/24 event Protocol failure -- Unicall/24 protocol error. Cause 32776 Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 Channel echo cancel Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 Channel gains Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report: MFC/R2 UniCall/24 Channel switching -- Hungup 'UniCall/24-1' Nov 24 05:53:54 NOTICE[-286483536]: pbx_spool.c:234 attempt_thread: Call failed to go through, reason 1 Something else funny is happening: as soon as the telco makes a reset of the trunk they say they start receving data as if the PBX would be generating calls, then all channels go "sealed" except for 1. Anyone having an idea on how to solve this? Alyed _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"; _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
