Hi,
In short - Asterisk is not able to recognize that the 'other' person to whom call was made has hung up - hence the channel stays busy. In long: I've been able to configure asterisk 1.1.12 with freepbx 2.1.3 and Digium TDM400 card (4 FXO ports). I've terminated 2 PSTN lines on these ports and making outbound calls successfully using the outbound rules. However, if the 2nd party hangs the call, this is not detected and the Flash panel (FOP) shows the ZAP channel as busy. This continues until the line is dropped on the XLITE too. Ever weirder - once my PC rebooted in process of a call, so there was no way I could hang up using the PC. The other party hung up. Even then the zap channel stayed busy. The Xlite extension which made the original call appeared as busy on FOP, but was able to make and receive calls using line-2. I had to restart the server for channel to become free and FOP to reflect that. What could be the places I look at since I am using mostly original/default settings, making only dial-plan changes? Regards, Farzal ---------------------------------------------------------- Farzal Ali Dojki PK: 92-21-2635021-24 | US: 1-512-STAY-UBM Telecom :: Call Centre :: Security :: Computing http://www.ubm.com.pk [EMAIL PROTECTED]
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users