Since nobody answer my previous question (It looks like g.726 is a bad word). I have this scenario: One box with Asterisk 1.4.0 beta 2 IAX to anothers Asterisk working properly. As an ATA I have only one Grandstream HT496. Two lines on the ATA 727 & 726. >From outside I can call any of those two extensions if: I defined both as ulaw (G.711) One as ulaw and the other as G.729 Only one at the time if I define both as G729 Only the G711 if I define one as G726 and the other as G711. No way to make calls between the two extensions if both are G726, or both are G729 Or if one is G726 and the other is G729 or ulaw. I allways get codec not match or invalid on the console. Grandstream claims that they can handle two g729 calls at the time ( I never was able to do this), and even when I change the rtp.c the G726 is not working at all. (I 'm not sure but it looks like is more an Asterisk problem, since the modification was made for Sipura boxes, but even when other phones, after the 1.2.6 we have fast busy problems on those devices with that code) So at this point. if someone has any other experience that want to share I'll appretiate it. Thanks Carlos Alperin
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
