As I understand your configuration , dial-peer voice 697617664 voip, only forward the pattern 697617664( destination-pattern 697617664) to XXX.XXX.XXX .115:5060 ( session target ipv4:XXX.XXX.XXX.115:5060) that I think is your Asterisk box. An incoming call in your E1 must much a destination pattern, your only destination pattern is 697617664. Usually an E1 has several DID associated it in a consecutive range, 91 5344XXX for example.
otherwise, for outgoing calls you must configure a pots dial peer ,you can put a randon name to the dial peer. You can configure asterisk , without user registration with the sip.confinsecure option when I copied dial-peer voice 10 pots destination-pattern 0T should be .T it tells cisco 26xx router what patterns can be reached throught E1 I´ll take a look into the cisco web site for sip user authentication, I have a configuration done, but with FXS interfaces and worsk fine. best regards 2006/12/7, FaberK <[EMAIL PROTECTED]>:
http://pastebin.ca/270840 This is the newone with some changements. Unfortunately, always the same problem. Fran, if I add the "dial-peer voice 10 pots", I receive the advise that the number does not exist. Also, I do not find the way to add "authentication username "asterisk-uername" password XXXXXX". The story continues... Thanks F.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
