So there are "0" watchers while the GXP is configured to that hint? are you sure you set the phone to "Asterisk BLF"?
On 11/15/06, Ken Williams <[EMAIL PROTECTED]> wrote:
Upon further investigation I must be doing something wrong. It was my understanding that a "hint" extension could be anything, it wasn't the same as a real extension, though you could make it the same to make it easier. That being said *exten => 702,hint,SIP/702 *works, while *exten => 102,hint,SIP/702* doesn't. I've got a GXP-2000 with the first button set to AsteriskBLF username 102 and the second button set to AsteriskBLF username 702, only the second button actively monitors 702. I've read, reread, rereread and so on a ot of examples of hint files and I can't figure out why the GXP-2000 doesn't like them. When I do *show hints* in CLI it is registering both 102 & 702 properly. ------------------------------ *From:* [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] *On Behalf Of *Ken Williams *Sent:* Wednesday, November 15, 2006 1:54 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* [asterisk-users] Monitor Zap Status - Full E-mail... I've installed Grandstream GPX-2000 phones and have successfully enabled one of my buttons to use Asterisk BLF for an extension. I can tell when this extension is available, is being rung, or is on the line. I'd like to do the same for my Zaptel channels, to be able to see when a line is onhook, ringing or offhook. I tried the following but alas, it doesn't seem to be working: *exten => 102,hint,ZAP/2* I based that on: *exten => 732,hint,SIP/732 * which does work for the SIP phones. If I do "show hints" in the CLI, I get 102 : ZAP/2 State:Idle Watchers 0 732 : ZAP/1 State:Idle Watchers 0 When a call is made on the ZAP/2 line the State changes to InUse, so I know it's working on that side. Any thoughts or suggestions as to how I can monitor a ZAP line on my GPX-2000? The problem is we have 6 lines, so my plan was to use the 7 buttons down the side, the top 6 for lines and the 7th for paging. Thanks for the help, Ken *Sorry about duplicate e-mail, accidentally hit ENTER when holding CTRL instead of V to paste.... _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
