I have since added fxs_ks=1 and channel => 1 This has not fixed the problem. I do notice a warning on the reload of asterisk.
WARNING[4296]: chan_zap.c:10874 setup_zap: Ignoring signalling -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tzafrir Cohen Sent: Monday, 11 December 2006 4:47 PM To: [email protected] Subject: Re: [asterisk-users] X100P clone dial problems. On Mon, Dec 11, 2006 at 04:18:20PM +1100, Klaverstyn, David C wrote: > I'm not sure if I have a configuration problem or not. I am unable to > dial out. When I try to dial in I can hear the phone ring on the > dialling phone but Asterisk does not register anything. > > > > > > In zaptel.conf I have > > > > loadzone = au > > defaultzone=au > > fxsks=1 > > > > In zapata.conf > > > > language=au > > context=from-pstn > Those need to be in the section [channels] and be followed by a channel => 1 to actually have any effect. You also must set signaling (signalling = fxs_ks; in your case). -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
