I am configuring two cards in Trixbox. 1 TE110P T-1 card and one TDM2400P with 16 fxs ports (All 24 show up in zaptel.conf so the PRI channels start at 25). Can I use a channel range to separate the config for each card, as shown below, or do I have to enter configs for each channel?
Also in zaptel.conf I see that the TDM card is span 1 board zero, And the T-1 card is Span 2 board 0. So for the T-1 card I entered span=2,1,0,esf,b8zs" Is this correct? What are the trailing 1,0 for after the span ID? OT-In reference to posting messages-what is "top posting"? ---------------------------------- ; Zapata telephony interface [trunkgroups] ; [channels] ; context=incoming switchtype=national ; signalling=fxs_ks usecallerid=yes cidsignalling=bell hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no musiconhold=default channel=1-16 ; context=incoming switchtype=national ; signalling=pri_cpe usecallerid=yes cidsignalling=bell hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no musiconhold=default channel=25-47 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
