Thanks for confirming that it can go that low. The decimal point doesn't make a difference; I just added a decimal to determine the threshold at which point things stop working (-7 doesn't work, but -6 does)
Steve On 12/12/06, Andy Kuo <[EMAIL PROTECTED]> wrote:
Hi Steve, I tried txgain as low as -18 without any problem, but I never tried anything with decimal points. Andy On 12/12/06, Steve Hsieh <[EMAIL PROTECTED]> wrote: > Greetings everyone, > > I have a Digium TDM400P card with both an FXO and FXS module to connect to > the phone company and to a standard phone. The problem is that the volume of > my voice is going out too loud. > > I tried lowering the txgain value in zapata.conf to compensate, but all > audio drops out completely if I set txgain to -6.4 or lower. If I set it to > -6.3, then everything works (but still too loud). > > Is there a limitation as to how low txgain can be set? From voip-info.org, I > was under the impression that the range was -100 to 100. Even the page at > http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf > shows an example txgain of -15.9 > > Thanks. > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
