I did try this and it doesn't work. When logging in with the admin password it still waits for the "marked" user.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of RR Sent: Wednesday, December 13, 2006 7:03 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] MeetMe Conferencing and Marked Mode On 12/13/06, Savoy, Kevin - Williston, ND <[EMAIL PROTECTED]> wrote: > I am trying to set up a Conference room where users are put on hold > until the host arrives. I have figured out that the A option activates > marked mode and the w option is used to activate the waiting until the > marked user arrives. This seems to be what I need. What I can't seem to > find is how do I mark a user? > > Thanks I could be wrong but I reckon one way would be to give the "host" the admin password. You may or may not need to then add in your DialPlan the logic to "mark" the user entering the admin password as opposed to users who enter the general PIN. I'm assuming that since meetme is capable to authenticating against 2 PINs, it may auto-mark the user entering the password defined as the "admin" password in meetme.conf. HTH _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
