Thanks Andrew! I had it in separate contexts originally, but for some
reason it wasn't working with fax detection. I didn't realize I could
drop rxfax onto the s extension, for some reason I kept thinking it
was somehow connected with the fax extension only. Works beautifully
now, thanks a lot.
regards,
mayo
On Dec 16, 06, at 19:06 , Andrew Joakimsen wrote:
If you are using one line for fax only then you do not need to do
fax detect. Put it in its own context and make ths s extension be
Rxfax.
Everyone always tries to over-compliate stuff, and it seems to me
the less you know about asterisk the more elaborate and
overcomplicated schemes people can come up with.
On 12/16/06, Mayo Jordanov <[EMAIL PROTECTED]> wrote: Hello,
I have a rather odd problem with Asterisk detecting faxes. I have two
POTS lines coming into the box (TDM400P). Line 1 is for voice, Line 2
is fof fax. When I set them up with channel => 1-2 in zapata.conf ,
all is fine, but as soon as I have two channel => definitions,
Asterisk is unable to detect faxes. The fax line is not supposed to
ring local phones, so the most obvious solution was to try and split
the contexts. The configuration below is my current setup that works
almost flawlessly. The bits that aren't working are pretty annoyances
that result from using single context for both lines.
With the setup the way I want it, last two lines of channel 1
configuration and whole channel 2 configuration in zapata.conf would
be uncommented and there would be no fax detection in from-analog-zap
context - as per the comments in the config. As it is now, from-
analog-zap2 may not be giving enough time for fax detection, but I've
tried variations. Generally, all it will do is keep on ringing and
ringing and not detecting the fax tone. I've tried turning off echo
cancelation and few other things with no luck.
Is this possible bug in chan_zap or something related? Is there any
way I can debug more? From just looking at the console it looks like
a regular incoming call that keeps ringing and falling though. Any
ideas or recommendations?
Thanks,
mayo
The setup is as follows:
zapata.conf:
[channels]
language=en
switchtype=national
signalling=fxs_ks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancelwhenbridged=no
echocancel=64
echotraining=800
callgroup=1 ; i do not use call groups, left it in as it's default
pickupgroup=1
rxgain=0
txgain=0
group=1
immediate=no
context=from-analog-zap1
faxdetect=both ; normally would be: none
channel => 1-2 ; normaly would be: 1
;channel 2 ; normally would be uncommented
;echocancelwhenbridged=no
;echocancel=64
;echotraining=800
;rxgain=0
;txgain=0
;context=from-analog-zap2
;faxdetect=both
;immediate=no
;group=1
;usecallerid=no
;signalling=fxs_ks
;channel => 2
Both channels are in group 1 on purpose, as both lines may be used
for outgoing calls.
extensions.conf:
[from-analog-zap1]
include => incoming
; normally this wouldn't be here if zapata.conf worked as intended.
this bit would get handled by from-analog-zap2
exten => fax,1,GotoIf($["${CHANNEL}" != "Zap/2-1"]?4)
exten => fax,2,Set(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif)
exten => fax,3,rxfax(${FAXFILE})
exten => fax,4,Hangup
[from-analog-zap2]
exten => s,1,Answer
exten => s,n,LookupCIDName
exten => s,n,NoOp(CallerID: ${CALLERID})
exten => s,n,Hangup
exten => fax,1,Set(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif)
exten => fax,n,rxfax(${FAXFILE})
exten => fax,n,Hangup
exten => i,1,Hangup
exten => h,1,Hangup
[incoming]
include => parkedcalls
exten => s,1,Answer
exten => s,n(zapateller),Zapateller(nocallerid)
exten => s,n,LookupCIDName
exten => s,n,NoOp(CallerID: ${CALLERID})
exten => s,n(ring),Dial(SIP/2000&SIP/2001&SIP/2002,30)
exten => s,n,Voicemail(u2999)
exten => s,n,Hangup
exten => s,n(ring)+101,Voicemail(b2999)
exten => s,n,Hangup
exten => i,1,Hangup
exten => h,1,Hangup
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
