I have a line from BT (UK) connected to my asterisk system, on a TDM400P. I am able to see either distinctive ring cadences or caller ID but not both. If I try to enable both, all drings show up as 0,0,0.
This is a pain because, if I make a call out over that line and the number I call is busy, I can elect to camp on it (ringback), which results in a different cadence of ring when the called number clears. At the moment, if I try to do this, my IVR autoattendant picks up the ringback, when ideally I want to be able to make every phone in the house ring (distinctively in the case of the Zap devices but I have mastered that). I have read that this has been an issue for users in Argentina, Australia and New Zealand, and have tried patching chan_zap.c and recompiling, and enabling that patch, as people have had success with there. However, it has not made any difference here. It is more important for me to have the caller ID processing at present, but I do need distinctive ring detection as well. I use stable Debian with backports, meaning my asterisk is currently 1.2.10. All my packages are from there, patched as necessary. I hope this can be resolved fairly quickly. -- Phil Reynolds o ____ mail: [EMAIL PROTECTED] |L_ \ / Web: http://www.tinsleyviaduct.com/phil/ (_)- \/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95 _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
