Or more likely the tone may not be getting to asterisk. What FXO are you using? External FXO's like the SPA3000 often need to be set to 'inband' DTMF - both in sip.config and in the device's config and be sure to restart Asterisk after doing this..
Easiest way to test this is to call yourself from your cell and see if you can hear the DTMF tones on the Asterisk side as you enter them on your cell. If you can not hear them then Asterisk won't decode them! This is also necesssary for outgoing FXO calls to enable use of external IVR's like banking and business voice menus. There is much about this on this list in the past and in Asterisk bug reports. It is not exactly clear where the problem lies but it appears to be a combination of Asterisk and the SPA3000. This might be fixed in version 1.4 but I have not heard any reports as yet. Doug On Thu, 28 Dec 2006, mitcheloc wrote: > You could be using an older version of Asterisk that doesn't support it? > > On 12/28/06, Phil Finkler <[EMAIL PROTECTED]> wrote: > > > > Rob, > > > > Interestingly enough, I'm using that same sample macro, and that line is > > indeed in there, yet when I hit *, I hear the tone to leave a message. Any > > ideas? > > > > Phil > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
