Hello Yusuf
yusuf wrote:
Hi all,
I realize this is OT.
I just got a Cisco AS5300, and I need to configure it like such:
Asterisk -----(H323/SIP)------> Cisco ----- (E1/PRI)------->Telco
So calls originate from the Asterisk side (registered users on SIP or
just ZAP phones), and they go out H323 or SIP to Cisco, where they go
out PRI.
I have the Asterisk side sorted :) (either H323 or SIP), I need help in
the Cisco side. Can anyone give me a brief HOW-TO or tutorial on getting
this (either SIP or H323) done on the Cisco side.
The link with sample Cisco config Hoah has sent is fine. It's well
commented etc, but... I do not recommend you to copy it entirely :)
> [...skipped...]
How do I specify that H323 or SIP must be for incoming calls, and
outgoing must go out on the E1.
Cisco is running IOS 12.1.5-12.2.13a
I realize this is alot of questions, so please bear with me :)
You seem to need a clear-cut explanation of dial-peer matching process
like http://www.cisco.com/warp/public/788/voip/in_dial_peer_match.html
or more complete guides:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/int_c/dpeer_c/dp_confg.htm
and
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_c/vvfpeers.htm
I think I can help you deal with Cisco side once you have drafted a
clear setup.
--
Sincerely,
Andrew Pogrebennyk
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
