what if I go with full g711-no transcoding? remember that I will have an E1 coming in, so my usage can be up to 30 channels at once. if that is an overkill machine config, and for obvious reasons I cant use old hardware, what are your suggestions?
thanks, On 1/5/07, Luki <[EMAIL PROTECTED]> wrote:
> I was thinking of an HP DL140 with two 250gig sata disks and one > 3.8Xeon CPU with 2gig RAM. Should be plenty if not an overkill. One of our setups: 20 phones, 8 outgoing/incoming SIP trunks, MeetMe conferencing with ztdummy and no Zap hardware. IVR/voice mail/MOH/Recordings/etc. Runs on a single PIII-600, 256 MB RAM. CentOS 4.4 with a stock 2.6.9-42 kernel. Asterisk 1.2.5, in production for 1.5+ years. CPU usage about 2% per call. Quite reliable (hence not upgraded). This is a g711 only setup with no transcoding. --Luki _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------ _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
