I have a bunch of 7910's that I managed to get registered with
Asterisk 1.2.14:
managed5*CLI> skinny show devices
Name DeviceId IP TypeId R Model NL
-------------------- ---------------- --------------- ------ - ------ --
test7 SEP0004C1878F8E 192.168.0.226 6 Y 7910 1
The problem is that the phone resets when I attempt to make a call
from it or place a call to it.
If I pick up I have no dial tone and after 3-4 seconds the phone
resets. When that happens, on Asterisk I see:
Attempting to Clear display on Skinny [EMAIL PROTECTED]
skinny_new: tmp->nativeformats=4 fmt=4
-- Starting simple switch on '[EMAIL PROTECTED]'
then the phone resets.
when I try to call it, it doesn't ring and Asterisk displays:
Found device: test7
-- skinny_request([EMAIL PROTECTED])
-- Skinny cw: 0, dnd: 0, so: 0, sno: 0
skinny_new: tmp->nativeformats=4 fmt=4
-- skinny_call(Skinny/[EMAIL PROTECTED])
Trying to send: ''
Displaying message ''
Displaying Prompt Status 'Ring-In'
-- Called [EMAIL PROTECTED]
-- Skinny/[EMAIL PROTECTED] is ringing
skinny_hangup(Skinny/[EMAIL PROTECTED]) on [EMAIL PROTECTED]
then the phone resets.
Registration messages are:
-- Starting Skinny session from 192.168.0.226
Device SEP0004C1878F8E is attempting to register
-- Device 'test7' successfuly registered
Requesting capabilities
Received CapabilitiesRes
RECEIVED UNKNOWN MESSAGE TYPE: 2b
Buttontemplate requested
Sending 7910 template to [EMAIL PROTECTED] (7910)
Recieved SoftKey Template Request
Received SoftKeySetReq
Received LineStateReq
Received Time/Date Request
what could be causing this ?
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
