Has there been a fix released for this? We have just upgraded to 1.4, and this issue still exists, and is a real pain. Thanks in advance..... Gregory P. Scasny Golden Technologies, Inc. http://www.golden-tech.com <blocked::http://www.golden-tech.com> [EMAIL PROTECTED] <blocked::mailto:[EMAIL PROTECTED]> 219-462-7200 - Ph. 574-233-1300 - Ph. (866) 806-7127 - Toll Free 219-462-7257 - Fax.
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bruce Reeves Sent: Thursday, January 11, 2007 2:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] Parked calls and the # key I am perplexed by this so I how someone can help me out. On one of my servers the users began complaining that if they picked up a parked call they could not use the # key to transfer the call. This is a particualarly annoying issue since everyone has been taught to use #700 to park calls. At first I thought it was a DTMF issue with the polycom phones, since rebooting seemed to fix the problem. On further examination though, the # to transfer works on any call unless it has been retreievd from the parking lot. Then I began doubting that it had ever been possible, until I confirmed it worked on a system I built a few months back and someone in the IRC confirmed it was working on their systems. As it stands now I have taken configs from working and non working systems and compared them and have not found anything. I can reproduce this by calling someone, via sip phone or on a zap channel have the call parked by dialing "#700" pickup the call, by dialing 701 or so. At this point the only transfer option I have is the transfer key on the phone, which works, but not as quick for the users. I'm using the standard parking, I simply included parkedcalls into a features context and all phones have access to it. > show features Builtin Feature Default Current --------------- ------- ------- Pickup *8 *8 Blind Transfer # # Attended Transfer One Touch Monitor Disconnect Call * * pbx1*CLI> Dynamic Feature Default Current --------------- ------- ------- (none) > Call parking ------------ Parking extension : 700 Parking context : parkedcalls Parked call extensions: 701-720 This is an svn checkout of 1.2 r49922 Can someone tell me what might cause this? -- Bruce Nortex Networks
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
