Next configuration must work: zaptel.conf fxoks=1-4 loadzone=fi defaultzone=fi
Zapata.conf [channels] group=1 context=internt signalling=fxo_ks channel=1-4 Srsergio -----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de JanM Enviado el: jueves, 20 de noviembre de 2003 11:27 Para: [EMAIL PROTECTED] Asunto: RE: [Asterisk-Users] Still TDM400P problem > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Michiel Betel > Sent: den 20 november 2003 11:24 > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Still TDM400P problem > > > JanM wrote: > > >Hi again all, > > > >I have searched the list for help with my problem but I > canīt find an > >answer. I only manage to get one port of my TDM400P card working. > > > >When I do dmesg I get following, seems like four discovered ports: > >--------------- > >Zapata Telephony Interface Registered on major 196 > >PCI: Found IRQ 11 for device 02:00.0 > >PCI: Sharing IRQ 11 with 02:07.1 > >PCI: Sharing IRQ 11 with 02:0c.0 > >Freshmaker version: 63 > >Freshmaker passed register test > >Module 0: Installed -- AUTO > >Module 1: Installed -- AUTO > >Module 2: Installed -- AUTO > >Module 3: Installed -- AUTO > >Found a Wildcard FXS: Wildcard TDM400P REV E/F (4 modules) > Registered > >tone zone 5 (Finland) > >---------------- > > > >But when I do ztcfg -vv I only get one port configured: > >---------------- > >Zaptel Configuration > >====================== > >Channel map: > >Channel 01: FXO Kewlstart (Default) (Slaves: 01) > >1 channels configured. > >---------------- > > > >How do I configure/load the rest of the ports? > > > > > Add them in /etc/zaptel.conf... ztcfg reads this file and > configures zap > ports accordingly > > Michiel When I try that I get an error: "Ouch ... error while writing audio data: : Broken pipe" This works: zaptel.conf fxoks=1 loadzone=fi defaultzone=fi Zapata.conf [channels] group=1 context=internt signalling=fxo_ks channel=1 But when I try to set up more ports/channels on the first card it stops working. The following configuration doesnīt makes the "Ouch..." error: zaptel.conf fxoks=1-4 loadzone=fi defaultzone=fi Zapata.conf [channels] group=1 context=internt signalling=fxo_ks channel=1-4 What does it mean with "audio data" in the error message? ---JanM--- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users