Yes, IAX <--> IAX works fine it's when it's Zap(in) ->Asterisk -> Zap(out)
Every call that I pass through to that outgoing Zap channel (a dial out to a mobile phone) fails to hang up. CallerID is working -- with this sangoma card, which seems to need... cidsignalling=v23 cidstart=polarity ...to work in the UK If removing helps the disconnect detection, I don't mind losing my callerID support..... -- Chris "Ed W" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Chris Earle (CBL) wrote: > > Sorry -- you're right, I didn't express the scenario properly .. > > > > The disconnect supervision problem is when I 'forward'/divert an incoming > > POTS call out another FXO channel to a mobile phone or POTS line. > > (POTS -> Sangoma|Asterisk -> POTS/mobile) > > > > When the incoming POTS hangs up and/or the mobile the person was connected > > to .......... Asterisk/Sangoma doesn't hang the Zap channels up..... > > > > Just to clarifydoes it all work ok if you are using SIP or IAX for the > forwarded channels? Eg local SIP phones? > > I only have incoming zap lines in my config and with the exception of > hangup on ringing I have found hangup detection to work fine. I have a > fax machine forwarding in my config as well and again no problems yet > with hangup on that. > > Does it fail to work *every* time, or just intermittently? Does > CallerId work ok in your setup? (can be a clue to help diagnose your setup) > > Ed W > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
