Hi David,
I removed the 1s as suggested, but it did not work.
Well, I have halted the beep/bleak/single-ring somehow, by taking down the
inter-tie line between my asterisk and a PANASONIC TDA200.
What I have in place are:
ASTERISK SIDE: ASTERISK PBX 1.2 + Adit600 Channel bank(which gives analog
output and also takes PSTN lines into the Asterisk system)
PANASONIC SIDE: TDA200 Panasonic Hybrid PABX + PRI Card(this inter-ties to the
Asterisk system)
Apart from the bleak/single-ring on the Queue extensions, no visible problem
exist with the inter-tie.
Thanks.
----- Original Message -----
From: David Gomillion
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Thursday, January 25, 2007 1:07 PM
Subject: Re: [asterisk-users] Queuing Problem with Asterisk
On 1/25/07, George C. Attopany <[EMAIL PROTECTED]> wrote:
Hi,
<description of problem cut out for brevity>
member => Zap/9-1
member => Zap/10-1
member => Zap/11-1
member => Zap/12-1
member => Zap/13-1
member => Zap/14-1
member => Zap/15-1
member => Zap/16-1
I don't think you want the -1 on the end of each line. Try:
member => Zap/9
member => Zap/10
member => Zap/11
member => Zap/12
member => Zap/13
member => Zap/14
member => Zap/15
member => Zap/16
Hope that helps,
David
------------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
