Moises, I 've stated testing by raising all timers a bit. Everything went worse, now there are more failed calls. Can you give me a hint of which timers to modify and, if you know, a more extensive explanation of each one? I know it's documented into the file but I cannot catch the concept.
Thanks you very much! Greets. On 1/21/07, Facundo Ameal <[EMAIL PROTECTED]> wrote:
Thanks Moises, I was trying to find some consistence, but the only similarity I could find is that much of the calls that fail are long distance ones or international. It fails in both, Telmex and Meridian link. I 'll try looping. I'll be posting results soon. I hope I can manage to get it work. Thanks for your help. Regards. On 1/19/07, Moises Silva <[EMAIL PROTECTED]> wrote: > Similar probles I had were fixed incrementing one of the timers, but > if you have already done that, I have no idea of your problem, you > require to debug the problem and try to find some consistence in the > failures, find if the failure is on the Asterisk -> telco Link, or in > the Asterisk -> meridian link? find if putting in loop your own > asterisk still fails, etc etc. > > Kind Regards > > On 1/18/07, Facundo Ameal <[EMAIL PROTECTED]> wrote: > > Thanks for your help, but I've already adjusted timers on the source > > code. I found your document a week ago and read it. > > Do you really think that is a matter of timers only? > > > > Greets! > > > > On 1/18/07, Moises Silva <[EMAIL PROTECTED]> wrote: > > > Sometimes timers need to be adjusted on the mfcr2 source code. > > > Sometimes is missconfiguration. Anyway, may be this document can help > > > you out to debug the problem: > > > > > > http://moy.ivsol.net/unicall/mfcr2-asterisk-unicall-0.2-english.pdf > > > > > > Kind Regards > > > > > > On 1/17/07, Facundo Ameal <[EMAIL PROTECTED]> wrote: > > > > Hi everyone! > > > > I'm having some issue trying to place calls with asterisk connected to > > > > an E1 R2 from Telmex Argentina. The other E1 port is connected to a > > > > Meridian which also uses R2 protocol. Calls sometimes fail with > > > > different error messages such as: Unicall protocol error 32773, 32772, > > > > 32769. Some other calls fail saying: > > > > Far end disconnected(cause=Destination out > > > > of order [27]) > > > > Far end disconnected(cause=User alerting, > > > > no answer [19]) > > > > Far end disconnected(cause=Switching > > > > equipment congestion [42]) > > > > Far end disconnected(cause=User busy [17]) > > > > > > > > I don't think those causes are real, because if you use another line, > > > > yo establish the call. Could it be something about timing of ABCD > > > > bits? > > > > > > > > I'm using: > > > > Asterisk 1.2.6 > > > > Zaptel 1.2.5 > > > > libmfcr2 0.0.3 > > > > libunicall 0.0.3 > > > > libsupertone 0.0.2 > > > > spandsp-0.0.3 > > > > > > > > And this is my unicall.conf: > > > > > > > > [channels] > > > > loglevel=1023 > > > > usecallerid=yes > > > > hidecallerid=no > > > > callwaitingcallerid=yes > > > > threewaycalling=yes > > > > transfer=yes > > > > cancallforward=yes > > > > callerid=asreceived > > > > callreturn=yes > > > > echocancel=no > > > > echocancelwhenbridged=no > > > > echotraining=no > > > > rxgain=0.0 > > > > txgain=0.0 > > > > callgroup=1 > > > > pickupgroup=1 > > > > immediate=no > > > > > > > > musiconhold=default > > > > protocolclass=mfcr2 > > > > protocolvariant=ar,10,4,15 > > > > protocolend=cpe > > > > group=1 > > > > context=from-zaptel > > > > channel => 1-15 > > > > channel => 17-29 > > > > > > > > loglevel=0 > > > > usecallerid=yes > > > > hidecallerid=no > > > > callwaitingcallerid=yes > > > > threewaycalling=yes > > > > transfer=yes > > > > cancallforward=yes > > > > callerid=asreceived > > > > callreturn=yes > > > > echocancel=yes > > > > echocancelwhenbridged=yes > > > > echotraining=yes > > > > rxgain=0.0 > > > > txgain=0.0 > > > > callgroup=1 > > > > pickupgroup=1 > > > > immediate=no > > > > > > > > protocolclass=mfcr2 > > > > protocolvariant=ar,0,12,12 > > > > protocolend=cpe > > > > group=2 > > > > context=hacia-afuera > > > > channel => 32-46 > > > > channel => 48-60 > > > > > > > > > > > > Thanks in advance! > > > > > > > > Greets! > > > > > > > > > > > > > > > > -- > > > > Facundo Ameal. > > > > fameal<at>gmail<dot>com > > > > Linux User #395088 > > > > > > > > Share your knowledge, use free software. > > > > _______________________________________________ > > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > > > asterisk-users mailing list > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > > > > > -- > > > "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org" > > > _______________________________________________ > > > --Bandwidth and Colocation provided by Easynews.com -- > > > > > > asterisk-users mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > -- > > Facundo Ameal. > > fameal<at>gmail<dot>com > > Linux User #395088 > > > > Share your knowledge, use free software. > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org" > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Facundo Ameal. fameal<at>gmail<dot>com Linux User #395088 Share your knowledge, use free software.
-- Facundo Ameal. fameal<at>gmail<dot>com Linux User #395088 Share your knowledge, use free software. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
