Hi!
I don't understand what you mean by : ā€˛configure voice part on it", but I can give general guidelines: First you setup SPA3000 web UI: 1) Line1 Tab: Sip settings: SIP port : 5060 Proxy and Registration: Proxy: Asterisk IP Subscriber Information: Display Name: FXS_username Password: FXS password User ID: FXS_username 2) PSTN Line Tab: SIP Settings: SIP port: 5061 Proxy and Registration: Proxy: Asterisk IP Subscriber Information: Display Name: FXO_username Password: FXO_password User ID: FXO_username Dial Plans: Dial Plan 1: (<S0:[EMAIL PROTECTED] IP:5060>) (may be any other dial plan) VoIP-To-PSTN Gateway Setup: VoIP-To-PSTN Gateway Enable: Yes Line 1 VoIP Caller DP: 1 (or any other setup like Dial Plan 1) VoIP Users and Passwords (HTTP Authentication) VoIP User 1 Auth ID: asterisk VoIP User 1 DP: 1 (same as above) PSTN-To-VoIP Gateway Setup: PSTN-To-VoIP Gateway Enable: Yes Then Asterisk sip.conf: [ FXO_username] disallow=all allow=alaw type=friend fromuser= FXO_username username= FXO_username secret= FXO_password host=dynamic dtmfmode=rfc2833 canreinvite=no qualify=1000 context=incoming port=5061 [FXS_username] disallow=all allow=alaw type=friend username= FXS_username secret= FXS_password host=dynamic dtmfmode=rfc2833 canreinvite=no qualify=1000 context=outgoing Best regards Mihaela MJ On 1/26/07, Jonson Player <[EMAIL PROTECTED]> wrote:
Hello, I just buyed a SPA3102 from Linksys. Can anyone help me or guide me to configure voice part on it. I cannot get it if I can use like peer for my asterisk. Please help me with some tips. Thank you guys. Regards, Jonson. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users