what kinda of cable are you using to connect to the e1. isit shielded or just the generic one they give with the card?
On 1/28/07, Porier, Jeremy M. <[EMAIL PROTECTED]> wrote:
Do you see anything in /var/log/messages? I am having a similar problem but I'm also getting some "pci fatal error!" messages. I had sangoma connect to the box and he couldn't find any config errors so we're leaning towards a hardware problem. - Jeremy -----Original Message----- From: [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] On Behalf Of Jon Schøpzinsky Sent: Friday, January 26, 2007 7:21 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] Sangoma card dying after 1hour Asterisk is version 1.2.14, zaptel 1.2.12, libpri is whatever version was with zaptel 1.2.12 :) Jon -----Original Message----- From: [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] On Behalf Of Steve Davies Sent: 26. januar 2007 12:03 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Sangoma card dying after 1hour Which asterisk versions etc etc? On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > I am running the newest version, from the sangoma wiki. > > Jon > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Steve > Davies > Sent: 26. januar 2007 10:56 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Sangoma card dying after 1hour > > On 1/26/07, Jon Schøpzinsky <[EMAIL PROTECTED]> wrote: > > > > Hello List > > > > I am having a rather big problem with a sangoma A104 card, I just > > installed to replace a Digium TE410 card, that was acting up. > > > > But now we have a problem with the sangoma card. It runs great after > > being started, and calls proceed as normal, but after about 1 hour, > > it stops being able to make and receive calls. > > > > If I run wanpipemon debug, can see that the card still receives > > packets from the ISDN, but when I make a call, I cant see it in > > wanpipemon, and asterisk just responds with a: > > > > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' > > (cause 34 - Circuit/channel congestion) > > > > I am pretty shure that this is a configuration issue, but are there > > anything I need to be aware of when moving from a Digium card to a sangoma card? > > Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded > as there are some resource leak fixes in that version. > > Regards, > Steve > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
