Leo Ann Boon wrote: > >> >> It is, and is identified by wcfxo as "a Wildcard FXO: Wildcard >> X100P". So much for "The DigitNetworks X100P is detected as an actual >> X101P card." > IIRC, there were 2 Digium single FXO cards - the X100P using the > Motorola SM56 and the X101P with Intel/Ambient 537. The X101Ps have 2 > RJ-11 jacks. Functionally, they're all Winmodems - effectively just DAAs > connected to the PCI bus. The Zaptel driver is responsible for the > caller ID and DTMF detection. Maybe you have a borked card or it could > be due to impedance mismatch. I know that the X101P only works with FCC > 600 Ohm impedance. For other parts of the world, YMMV. > > Leo > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
02:08.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
Subsystem: Intel Corporation Digium X100P/X101P analogue PSTN FXO
interface
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping-
SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr+ DEVSEL=medium >TAbort-
<TAbort- <MAbort-
>SERR- <PERR-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at f7ce0000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
cat /etc/zaptel.conf
#
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
loadzone = us
defaultzone=us
fxsks=1
# cat zapata.conf
[channels]
busydetect=yes
busycount=7
relaxdtmf=no
callprogress=no
callreturn=yes
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
usecallerid=yes
echocancel=yes
echotraining=yes
echocancelwhenbridged=yes
rxgain=1.0
txgain=-1.0
immediate=no
context=house:in
signalling=fxs_ks
callerid=asreceived
channel => 1
faxdetect=both
faxdetect=incoming
faxdetect=outgoing
faxdetect=yes
useincomingcalleridonzaptransfer=yes
CallerID works fine with my X100P :-P
signature.asc
Description: OpenPGP digital signature
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
