Other phones have a defined dialplan, just like an ATA the GXP is the only
phone I've seen like that!
I had a sudden stroke of genius, I haven't tested it, but I'm sure it would
work. Define a DISA with no password at extension 011, and define a context
where international calls can be dialed without 011, IE:
exten => 011,1,DISA
[gs-intl]
exten => _xx.,1,Dial(ZAP/g0/011${EXTEN})
and then asterisk can handle the timeouts
On 11/20/06, Anthony Kepler <[EMAIL PROTECTED]> wrote:
We are on the same page.
If you happen to find a solution - or know of a way that other phones
address these issues, please let me know.
Andrew Joakimsen wrote:
> Ok, I actually GOT a GXP-2000. It does not have a dialplan. You
> cannnot dial without the handset off-hook. I do not seem to find a way
> to use early dial for international calls in a practical way, not
> being able to dial international calls is not acceptable. Having to
> dial # or send for domestic calls isnt either, and neither is having
> to wait 4 or 5 seconds for domestic calls to complete....
>
> Or am I missing something?
>
> On 11/8/06, *Anthony Kepler* < [EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>> wrote:
>
> Early dial is a feature on the phone that makes use of the 484
> ("Address
> Incomplete") response.
> This is desired for in-office, local (PSTN), and long distance
> dialing.
> I'm really hoping to find a "best-of-both-worlds" solution to this.
>
> Andrew Joakimsen wrote:
> > Does the GXP-2000 not have its own dialplan? Use that and disable
> > early dial
> >
> > On 11/3/06, *Anthony Kepler* < [EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>
> > <mailto: [EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]>>> wrote:
> >
> > I am trying to allow users to place outgoing international
calls
> > from a
> > GPX-2000 with "early dial" enabled, connected to Asterisk
> 1.2.12.1 <http://1.2.12.1>
> > <http://1.2.12.1>
> > I have the following extension line:
> > exten => _011.,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
> >
> > When I attempt to place a call to a number in, for instance,
> Kenya, I
> > dial "011254"...etc.
> > and I get this on the asterisk console:
> > Executing Dial("SIP/1001-081fb718", "Zap/g1/0112") in new
stack
> > -- Called g1/0112
> >
> > It is attempting to dial out as soon as it receives a single
> digit to
> > represent the "."
> > What I need is for it to wait a reasonable amount of time for
> > additional
> > digits.
> > I have tried using set(TIMEOUT(digit)=5), and I see the
> following
> > in the
> > asterisk console:
> > -- Executing Set("SIP/1001-081fb718", "TIMEOUT(digit)=5")
in
> > new stack
> > -- Digit timeout set to 5
> > However, this is printed far less than 5 seconds before the
> dial out
> > attempt.
> >
> > I assume there must be something relatively obvious I'm
missing
> > here...
> > if anyone can shed some light on this, it would be greatly
> > appreciated.
> >
> >
> > Thank you,
> > - Anthony Kepler
> > [EMAIL PROTECTED]
> <mailto:[EMAIL PROTECTED]> <mailto:[EMAIL PROTECTED]
> <mailto: [EMAIL PROTECTED]>> |
> > SIP/Email
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com
> <http://Easynews.com>
> > <http://Easynews.com> --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > < http://lists.digium.com/mailman/listinfo/asterisk-users>
> >
> >
> >
>
------------------------------------------------------------------------
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com
> < http://Easynews.com> --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> <http://Easynews.com> --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
