On Friday 26 January 2007 23:40, Leo Ann Boon wrote: > Kyle Gordon wrote: > > fxsks=1 #X100P > > Is your line truly a kwelstart line? try fxsls > > > <SNIP> > > busydetect=yes > > You may need to add these 2 values to help the busydetect > busycount=3 > busypattern=375,375 > > busypattern tells asterisk how your busy tone sounds like, in UK it > should be 400Hz 0.375s ON and 0.375s OFF. The busycount tells asterisk > how many consecutive cycles it must detect before dropping the line. > You'll have to determine the best value for your setup, by trial and > error. Too low - you might get premature hangup, too high - you'll have > to wait for a long time for the line to hangup. A value of 3 will cause > Asterisk to hang up in about 2.1s. > > > <SNIP> > > switchtype=national > > This is not needed for analog lines. > > > signalling=fxs_ks > > Change to fxs_ls to match zaptel.conf >
Hi Leo, That appears to have done the trick. fxs_ls does seem to detect it hanging up more reliably. I don't know what the difference is, but it works :-) If there's any change, I'll be sure to let you know :-p Many thanks, Kyle -- Kyle Gordon [EMAIL PROTECTED] http://lodge.glasgownet.com
pgpLlMUhplz8z.pgp
Description: PGP signature
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
