Here is what he was getting at: 1.2.x and ztdummy and meetme all work fine.
However.... Compile Zaptel 1.4.0, install, reboot Zttool shows ztdummy as the timing device. Lsmod shows it loaded. If you then compile Asterisk 1.4.0 it fails to compile app_meetme My quick and dirty solution just now: Removed the DEPENDS_app_meetme=ZAPTEL from the file menuselect.makedeps And in menuselect.makeopts I removed the DEPSFAILED line that had meetme in it. It then compiled. Bill -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Oded Arbel Sent: Sunday, January 28, 2007 5:47 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk 1.4 problem with ztdummy and MeetMe() On Thu, 2007-01-25 at 18:40 +0100, Stefan Wintermeyer wrote: > Hi, > > when I build zaptel-1.2 and asterisk-1.2 I can modprobe ztdummy and > start asterisk to be able to use MeetMe(). > > When I build zaptel-1.4 and asterisk-1.4 I can modprobe ztdummy and > start asterisk but I am not able to use MeetMe(). > > What do I miss? I'm not sure, because we missed the entire problem description, which I would imaging would have included log snippets and/or error message reports, but it was apparently removed from your e-mail. http://www.catb.org/~esr/faqs/smart-questions.html -- Oded Arbel Atelis [EMAIL PROTECTED] Tel: +972-54-7340014 ::.. He's dead, Jim. You grab his wallet, I'll grab his tricorder. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
