Any ideas? It should be simple...
Cosmin Prund wrote:
Hello everyone:
using chan_capi 0.7 and asterisk 1.4
Quick question:
How can I detect the number of "voice" channels (B channels) in use at
a given time. I'd like to call "Busy" if two B channels are used on my
BRI to give the calling customer a Busy signal.
Long question:
On my single-line BRI (two channels) I'd like to give the 3rd
simultaneous incoming call an busy signal. I already tested and the
Busy function works very well (I've set up one of my MSN's to
immediately call Busy). I also tested and I'm 100% sure the 3rd call
makes it into the box while the other 2 channels are talking, so this
is not a Telco problem and it can be "fixed" locally. Doing this on my
side of the line (as opposed to having the Telco issue the Busy signal
on my behalf) has an number of benefits: (a) I don't need to talk to
the Telco (b) I *know* who called and I can call them back and (c) In
a distant future I might use the capi channel's ability to transfer
the call to a different POTS line since this doesn't use the B channel.
Thanks,
Cosmin Prund
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
