I read all the other replies and want to thank everyone!! I think most of what other people mentioned is answered below. I'm only doing this to test Asterisk. I will be using T1 cards when I start putting Asterisk in production. I've got several Ad-tran TSU 600s and 120s that I can use for analog access when I get to that point. All my prior work was using custom software on NMS AG8s, AGT1s and AG4000s which aren't supported by Asterisk so I wanted to use the X100Ps for proof-of-concept and to get familiar with Asterisk before buying the digital interface cards.
Thanks for the help! >> ZT_CHANCONFIG failed on channel 1: No such device or address (6) > This error message is specifically from running ztcfg. > What do you have in /proc/zaptel/* ? What in /etc/zaptel.conf ? > The difference between the two is the immediate cause for the error. In /proc/zaptel I have a single file named 1 In /etc/zaptel.conf I have the following lines: fxsks=1-2 loadzone=us defaultzone=us > What do you see in the kernel logs e.g: dmesg| tail ) after loading the > module wcfxo ? I did the following: # rmmod wcfxo # modprobe wcfxo ZT_CHANCONFIG failed on channel 1: No such device or address (6) FATAL: Error running install command for wcfxo # dmesg | tail Failed to initailize DAA, giving up... Wcfxo: probe of 0000:01:07.0 failed with error -5 Failed to initailize DAA, giving up... Wcfxo: probe of 0000:01:08.0 failed with error -5 Using lspci I verified that 01:07.0 and 01:08.0 are the X100P > What linux distribution do you use, anyway? Fedora Core 6 Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users