All digital lines (BRI or PRI) provides answer and release supervision.
The drivers will send to * this information, and this information will
be registered into the CDR automatically. You only need setup your
billing system.
As said before you do not need to intercept the billing pulse.
Jorge Mendoza
Stefano Corsi wrote:
At 16.22 07/02/2007, you wrote:
Funny that a digital line have a analogue pulse.
Normally the billing pulse is used on payphones. IMO you only need
the answer supervision to trigger your own billing system.
Yes, it's strange. But I find no mention on answer supervision in the
NT1Plus manual (NT1Plus is the hardware device the Telco installs when
you ask for an ISDN line). Where should I ask for answer supervision?
The Telco? That sounds very difficult in Italy... they have no
technical call centers. Almost only sales.
But if the line should provide those "analog" billing pulses... do you
think could be possible to intercept them?
Rgds
Stefano
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
