Hello,
I've installed two Digium TDM2400 cards on my server. One has 24FXS
and the other has 16 FXS and 4 FXO. They are both connected to power.
Unfortunately some of the FXS module fail to initialize and I find
following messages in the logs (the rest of the FXS modules work
well). Could someone give me some advice?
!!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000
Feb 9 18:09:45 [kernel] !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600
Feb 9 18:09:45 [kernel] !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000
Feb 9 18:09:45 [kernel] !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200
Feb 9 18:09:45 [kernel] !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0
Feb 9 18:09:45 [kernel] !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 4C00
Feb 9 18:09:45 [kernel] !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80
Feb 9 18:09:45 [kernel] !!!!!!! LOOP_CLOSURE_FILTER iREG 23 =
3970 should be 8000
Feb 9 18:09:45 [kernel] !!!!!!! RING_TRIP_FILTER iREG 24 =
78E0 should be 320
Feb 9 18:09:45 [kernel] !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 =
8B60 should be 8C
Feb 9 18:09:45 [kernel] !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 =
6A40 should be 100
Feb 9 18:09:46 [kernel] !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 =
8070 should be 10
Feb 9 18:09:46 [kernel] !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00
Feb 9 18:09:46 [kernel] !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00
Feb 9 18:09:46 [kernel] !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000
Feb 9 18:09:46 [kernel] !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B =
FFFF should be 1000
Feb 9 18:09:46 [kernel] !!!!! Init Indirect Registers UNSUCCESSFULLY.
Feb 9 18:09:46 [kernel] Indirect Registers failed verification.
Feb 9 18:09:46 [kernel] Port 5: FAILED FXS (FCC)
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
