From: "David Ruggles" <[EMAIL PROTECTED]>
Date: Fri, 9 Feb 2007 16:23:18 -0500
Thanks for the conf file, but it didn't make any difference. If I hang-up
during a record it will hang the channel until I stop Asterisk.
If I hang-up during playback I get the following:
[Feb 9 16:22:06] WARNING[4005]: pbx.c:2449 __ast_pbx_run: Invalid
extension
'D', but no rule 'i' in context 'incoming'
If this offers a clue.
Search recent and past archive for "disconnect supervision" and so on.
Bottom line is, you need telco to offer certain capability. Because you use
an analogue line, my impression is that Kewl start is common place in North
America, but some still use loop start. Some send you an audible fast busy
tone to indicate disconnect. I got one line like this. So I enabled
callprogress=yes. It helps, but not very reliable. If they don't even send
a tone, you are stuck.
As to Invalid extension 'D', you'll need to pose relavant portions of your
dial plan to determine if it is a real clue.
Yuan Liu
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Guillermo
Salas M.
Sent: Friday, February 09, 2007 3:45 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Detect hang-up
On Fri, 2007-02-09 at 15:31 -0500, David Ruggles wrote:
> I've got an X100P that doesn't seem to be detecting hang-ups. I'm not
sure
> what it's supposed to do, but I wouldn't expect it to continue
processing
> the dial plan.
>
> Any pointers? Documentation locations that address hanging up would
greatly
> appreciated!
Maybe my zapata.conf can help you. I've one X100P working for almost 2
years :)
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
