my card has just fxo modules and is put in a 3.3v slot. when running modprobe wctdm24xxp it waits for ever and dmesg shows "Resetting the modules...".
what could be the problem? when i put this card in another system with 5v slot it works fine. On 2/12/07, William Moore < [EMAIL PROTECTED]> wrote:
On 2/11/07, Paradise Dove < [EMAIL PROTECTED]> wrote: > does TDM2400 work on 3.3v pci slot? Yes, all of Digium's analog cards are dual voltage and can work with either 3.3V or 5V slots. You just need to make sure you have an extra molex connector if you're going to be using FXS modules on the card. William _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
