Hi,
What Network Switch you are using? I do traffic/bandwidth shapping on the edge
switch where the port the voice installed, you can configure each port to
128Kbps or just plain Ethernet Port. So the link between bldg. will always be
10Mb/s, who ever uses it whether data or voice and enable switch port
prioritization.
HP ProCurve and Cisco switches do this features. Don't know if others can do it.
Regards
Angel
Gordon Henderson <[EMAIL PROTECTED]> wrote: On Wed, 14 Feb 2007, Damon Estep
wrote:
> Why do that?
>
> Just traffic shape each user/group of IP addresses to the total
> bandwidth you want them to have and then set up a low latency queue for
> voip traffic, that way the voip bandwidth can be used for data when
> there are no calls but will give VoIP traffic priority over other
> traffic.
>
> Any old refurbished Cisco 2611 or 2621 will do the trick.
>
> Look up "low latency queuing" and "traffic shaping" on cisco.com
>
> If you are doing NAT on the router I recommend a general deployment (GD)
> 12.3 IP feature set IOS image.
I have to say, that unless you are quite good at driving Linux or *BSD's
firewall/traffic shaping mechanisms, then I'd probably go for a Cisco -
especially if this is a full-on corp-rat environment.
I would use a Linux box, but then I've been using Linux boxes for a great
number of years including setting up some hairy/scarey traffic management.
Gordon
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Wireless
> Sent: Wednesday, February 14, 2007 8:36 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Bandwidth shapping device
>
> I'd use a MikroTik or 2
>
> ----- Original Message -----
> From: "Ronald Wiplinger"
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>
> Sent: Wednesday, February 14, 2007 2:19 PM
> Subject: [asterisk-users] Bandwidth shapping device
>
>
>> I have a link to a building (e.g. 10Mb/s) and want to split up the
>> bandwidth to different users. Each user should get e.g., 512kB/s plus
>> 256kB/s dedicated for VoIP.
>>
>> What kind of device can I use for that ? (managing switch ??? which
> one?)
>>
>>
>> bye
>>
>> Ronald Wiplinger
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by ESVA, and is
>> believed to be clean.
>>
>>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
---------------------------------
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight and hotel
bargains.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
