At 10:09 11/02/2007 -0500, Gordon Henderson wrote:
On the CN1000 boards I'm using, the PCI slot seems tobe locked to IRQ10. The on-board USB hardware also seems to be wired to IRQ 10 :-) Using the BIOS to "reserve" IRQ 10 caused the on-board USB hardware to move to IRQ5 on the old VIA 533MHz boards I use for R&D, but not on the new CN1000 boards. You'll need to experiment with this on the EX board...
Thanks a lot for the feedback. I'll probably get an ML8000, so hopefully the PCI board can have its own IRQ.
I've not tried it (I boot them off a flash IDE device I create on a host system), but can't you just temporarily plug in a CD drive to do the install (onto a local IDE/SATA drive) then unplug it & put the lid back on?
Right, I hadn't thought of this. Guess that solves the issue then. Looks like the only site that sells the Travla 138 is www.caseoutlet.com .
Thanks. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
