Wireless wrote:
Does anyone know if the HPEC will work on a Sangoma A200 / 2 port FXO card?
(I'm assuming so as it still uses Zapel) I've 2 PSTN lines one of which I
cannot get rid of the echo, I've tried a 2GHz machine as apposed to my
normal P3 650MHz and this made no difference. Would the 650Mhz be enough to
run HPEC on one line (I assume only needing one licence)
It should work, providing all the Wanpipe stuff is ready to work with
Zaptel 1.2.13.
As far as performance, you should be able to get one, maybe two channels
of 1024 tap cancellation on the P3, but I'd advise careful testing,
perhaps even using oprofile for a while to keep an eye on what's using what.
You also have to watch out extra carefully due to the following: HPEC
works in "sparse" mode, meaning it can cover 1024 taps, but just cancels
echo in the parts where there is echo - hence CPU usage will likely
change quite a bit with different echo paths - ie. a simple single
reflection path will use less CPU than a complicated path with more than
one reflection.
Cheers,
Nic.
--
Nic Bellamy,
Head Of Engineering, Vadacom Ltd - http://www.vadacom.co.nz/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
