On Sun, Feb 18, 2007 at 10:55:20PM +0200, Itamar Lavender wrote: > Hi, > > I have HT488 with it's FXO connected to Israeli PSTN (bezeq) when > dialing to that PSTN line asterisk see gets the call and direct it to > the right extension but if the extension doesn't answer and the dialer > is hanging the call the extension will keep on ringing. > I'm not an expert but it seems like my asterisk doesn't recognize the > hangup signal from the HT488 -or it's the HT88 which doesn't hangup upon > the signal.
Chances are that the unit does not have proper busy detection. Perhaps it does not know how the Israeli busy tone sounds like. And no: Bezeq does not provide any better disconnect supervision. > > this is my HT488 FXO config: > PSTN Disconnect Tone: Frequency: f1 420 f2 420 Try 400? > PSTN Disconnect Tone Cadence: Choice 1: On 500ms Off 500ms > > Asterisk SVN-trunk-r48967 -- Tzafrir Cohen icq#16849755 jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users