Yes, it is complicated. We moved all the telco trunks to PRI last week
monday, but the configs for the old settings are still there. We will
be moving all the channels going into the Nortel onto a Nortel T-1 card
(nor PRI, PRI for Nortel requires a costly feature activation code) soon.
/etc/zaptel.conf:
loadzone = us
defaultzone=us
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
span=3,0,0,esf,b8zs
span=4,0,0,esf,b8zs
fxsks=1-8
e&m=9-12
fxsks=13-20
bchan=25-47
dchan=48
fxoks=49-56
e&m=57-60
fxoks=61-68
/etc/asterisk/zapata.conf:
[channels]
wink=270
rxwink=270
usecallerid=no
echocancel=256
echotraining=900
musiconhold=default
toneduration=300
; Incoming from Telco
context=incoming
group=1
signalling=fxs_ks
channel => 1-8,15-17
; Incoming from Telco (Property Services)
context=temp-propserv-incoming
group=0
signalling=fxs_ks
channel => 13-14,18-20
; DID channels from Telco
context=incoming
group=0
signalling=em_w
channel => 9-12
; Incoming from Channel Bank Corporate
callerid=Northpark, Corporate <5558982022>
context=toll-access
group=2
transfer=yes
threewaycalling=yes
signalling=fxo_ks
channel => 49-56,63-65
; Incoming from Channel Bank Property Services
callerid=Northpark, PropServ <5558980260>
context=toll-access
group=5
transfer=yes
threewaycalling=yes
cancallforward=yes
signalling=fxo_ks
channel => 61-62,66-68
; DID E&M Wink channels to Channel Bank
context=INVALID
group=3
transfer=no
threewaycalling=no
cancallforward=no
signalling=em_w
; 57 is bad on the nortel
channel => 58-60
; VIVA LE PRI!
usecallerid=yes
echocancel=no
group=4
switchtype=national
signalling=pri_cpe
context=incoming
channel => 25-47
Jason Kim wrote:
Would you attach your whole zaptel.conf and
zapata.conf?
--- C F <[EMAIL PROTECTED]> wrote:
Also check out immediate=no
On 2/18/07, Eric ManxPower Wieling <[EMAIL PROTECTED]>
wrote:
Eric "ManxPower" Wieling wrote:
David Ruggles wrote:
I'm sending 12345 as DNIS on a Wink Start T1.
In case it makes a
difference,
I'm using a Sangoma A101 card. Asterisk sees
each digit as a separate
extension number so most of the dialplain
suggestions offered so far
won't
work. I did try the Wait() function as was
suggested. I tried it first
in an
"s" extension but this didn't work, it still
gave the error: "Unknown
extension '1' in context '1st-T1' requested" I
then changed it to
extension
1 and while it does seem to work (it doesn't
try the other extensions) it
seems like the DNIS is completely lost.
As I said in my first post (although it may
have been a little too
abrasive)
this configuration is very standard and so I
find it hard to believe that
Asterisk can't handle it.
We had to add this to the
/etc/asterisk/zapata.conf to make Asterisk
work with the E&M Wink start T-1 from our telco.
I guess I could paste the settings this time.
wink=270
rxwink=270
You might want to play with those settings.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
