-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Lawson >Sent: Thursday, November 20, 2003 7:03 PM >To: [EMAIL PROTECTED] >Subject: [Asterisk-Users] Solved! Snom 200 Busy signal
>As a follow up to my earlier posting, the problem with the Snom 200 Busy >signal was the firmware! I reverted back to 1.16x and everything's OK. >That made today pretty complicated, since I already had a new kernel and >a new Asterisk build I was trying all at once.... >Hopefully someone else will benefit... >- Matt I had the same type of problem you did when I first upgraded to 2.02t. But I did a CVS update on 11/19/03, and everything is fine now. What I did notice (and I have a customer that saw the same thing) is that that version 2.02t has added a new SIP "Publish" message. I still haven't been able to determine what they're publishing with it. But Asterisk didn't seem to like it until I did a CVS update. It didn't seem to respond to it. Now Asterisk sends back a "Status: 405 Method Not Allowed" message, and everything is fine. I can't definitively say this was the cause because I didn't go back to the old Asterisk code and verify. But I can tell you that my Snom 200 phones with version 2.02t work fine now. Jerry _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
