ahh! I am having this same problem all of a sudden I've installed many TDM cards before ..never had this problem
what gives? Trying to load zaptel 1.0.10 ... Rev. G card ... tried uncommenting the revH fix in zconfig.h ...but no go ideas?! -- Chris "Michael C. Cambria" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > > I'm having problems with a TDM22B. The FXO modules work fine. Both FXS > modules fail to initialized. > > The error messages I seeR when the module loads: > > Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > > I already RMA'ed a TDM22B because of this problem. Now that the > replacement shows a similar issue, I want to see if anyone else can > think of something to try; at least until Monday when I can get an RMA > number for this card. > > If it helps, I have a TDM20B (just FXS modules) that does not see this > problem when I place it in the same slot. > > > Here is what dmesg shows for the TDM22B when the system boots, or when I > issues modprobe wctdm: > > Freshmaker version: 73 > Freshmaker passed register test > !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 > !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 > !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 > !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 > !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 > !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 > !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 > !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 > !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 > !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C > !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 > !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 > !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 > !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 > !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 > !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 > !!!!! Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 > !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 > !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 > !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 > !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 > !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 > !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 > !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 > !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 > !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C > !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 > !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 > !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 > !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 > !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 > !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 > !!!!! Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > Module 0: FAILED FXS (FCC) > !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 > !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 > !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 > !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 > !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 > !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 > !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 > !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 > !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 > !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C > !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 > !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 > !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 > !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 > !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 > !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 > !!!!! Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 > !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 > !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should be 1000 > !!!!!!! COMMON_MAX_TRES iREG 1F = 0 should be 200 > !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 1480 should be 7C0 > !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 37C0 should be 2600 > !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 3D70 should be 1B80 > !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 3970 should be 8000 > !!!!!!! RING_TRIP_FILTER iREG 24 = 78E0 should be 320 > !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 8B60 should be 8C > !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 6A40 should be 100 > !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8070 should be 10 > !!!!!!! CM_BIAS_RINGING iREG 28 = FFFF should be C00 > !!!!!!! DCDC_MIN_V iREG 29 = FFFF should be C00 > !!!!!!! DCDC_XTRA iREG 2A = FFFF should be 1000 > !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2B = FFFF should be 1000 > !!!!! Init Indirect Registers UNSUCCESSFULLY. > Indirect Registers failed verification. > Module 1: FAILED FXS (FCC) > Module 2: Installed -- AUTO FXO (FCC mode) > Module 3: Installed -- AUTO FXO (FCC mode) > Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) > > > Thanks, > MikeC > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
