Thanks for your reply,but with both your suggestions, I get the following error:
Called TelaSip-gw4/5198881212D12345678 -- Got SIP response 484 "Address Incomplete" back from 4.79.19.59 == No one is available to answer at this time (1:0/0/0) I aslo tried sticking a , in between the number and D command, however CLI reads it as a pipe On 2/24/07, Tim Connolly <[EMAIL PROTECTED]> wrote:
I don't think you need the pipe in there. I've used this with the "w" option before, which adds a wait. Then continues .5 seconds later. RTM: http://www.voip-info.org/wiki-Asterisk+cmd+dial Try these: exten => s,2,Dial(SIP/TelaSip-gw4/5198881212D12345678) or exten => s,2,Dial(SIP/TelaSip-gw4/5198881212www12345678) also, you were missing a right parenth. -----Original Message----- From: [EMAIL PROTECTED] on behalf of Supa Sent: Sat 2/24/2007 9:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] dial a pager and enter DTMF Probably just a simple syntax issue, but does anyone know how to dial a number and the once phone has been answered, play DTMF tones and then disconnect. I am trying to use this for page notification. Ive been trying the following string with out luck: exten => s,2,Dial(SIP/TelaSip-gw4/5198881212|D(12345678) Any help would be greatly appreciated! _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
