There are 3 or 4 analog phones connected on the FXS port. Only 2 of them
have callerID.

On the CNAME as opposed to CNID, have NO idea! The callerID worked fine on
these phones until I cut them over to the asterisk server this weekend.

On 2/26/07, Jay R. Ashworth <[EMAIL PROTECTED]> wrote:

On Mon, Feb 26, 2007 at 04:31:07PM -0500, Barry D. Hassler wrote:
>    Recent installation with a simple TDM11B (one FXO, one FXS) that
>    I've set up (at home). I am receiving callerID fine from the telco,
>    as it shows up in my call detail records, AND on 2 SIP phones.
>    However, I'm not reliably receiving it (that is, very seldom does
>    it come through) on the analog phones. Any ideas on where to check
>    configurations, etc? I haven't encountered this issue before (my
>    other installations are always much larger than this one for home).

Two hipshots: How *many* analog phones on your one FXS?

And is it possible that the system is sending CNAME, not just CNID, and
the phones don't do names, and are confused?

Cheers,
-- jra
--
Jay R. Ashworth
[EMAIL PROTECTED]
Designer                          Baylink                             RFC
2100
Ashworth & Associates        The Things I Think                        '87
e24
St Petersburg FL USA      http://baylink.pitas.com             +1 727 647
1274
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




--
Barry D. Hassler
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to