on the sending server I do this:
exten => s,3,Set(CALLERID(all)=My Name<1234>)
exten => s,4,Noop(${CALLERIDNAME})
exten => s,5,Noop(${CALLERIDNUM})
exten => s,6,Dial(SIP/to-ServerB/${MACRO_EXTEN})
for the record, it shows the correctly set callerid and name on 4 and 5. When
I do a Noop(${CALLERIDNUM}) on ServerB it shows "fromServerA".
- Jeremy________________________________ From: [EMAIL PROTECTED] on behalf of Eric "ManxPower" Wieling Sent: Mon 2/26/2007 5:23 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk to Asterisk SIP Trunk and CallerID Porier, Jeremy M. wrote: > I have two asterisk boxes (1.2.14) connected via SIP with Polycom 501s > registered to each. I set callerid name and num before sending the call > from one box to another but the phone registered to the receiving server > only properly shows the caller name, not the number. The number on the > phone always shows as the name of the sip registration of the "calling" > server. > > Do I have to set a seperate sip header in the dialplan if I want to pass > callerid name and number between two boxes? I feel like I'm making this > too complicated. Show us the line that sets the Caller*ID in your dialplan. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
<<winmail.dat>>
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
