When we do SIP <-> SIP with asterisk 1.2, we do NOT experience this.
Polycom 501s, the instant you hit Send on the phone or the digit map
times out, the target phone rings AND you hear ringback. it's instant,
so I would guess this would be configuration on your end. back to the
digit map timeout maybe?
> Watching the CLI it does look like it takes a long time for the
> channel to pick up an dial.
I'm a little confused about your 'pick up and dial' phrase because,
well, we're talking about SIP here and not Zap :)
David Thomas wrote:
On 2/15/07, Jordan Novak <[EMAIL PROTECTED]> wrote:
I have had a lot of complaints about the time it takes to setup a call. I
have timed it and it is almost five seconds before it even starts
ringing.
The SIP device sends the request almost instantly but the channel is
taking
a long time to pickup and dial. It wouldn't be so bad but they hear
nothing.
I would like to provide ringback before the zaptel actually starts
ringing
the channel. Has anybody done this, it seems like it would be a zaptel
option.
Jordan Novak
I'm not sure if it's related, but we are doing only SIP to SIP calling
with Asterisk 1.4 and experience the same thing. The signaling shows
up instantly, but it takes 5-7 seconds before ringback is heard.
Watching the CLI it does look like it takes a long time for the
channel to pick up an dial.
regards,
David
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
