I posted to Trixbox forum, since that is what I'm running, here's the URL: http://www.trixbox.org/modules/newbb/viewtopic.php?topic_id=11168&forum= 4
Andrew > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 28, 2007 18:24 > To: Webster, Andrew > Cc: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [asterisk-users] No Caller ID Name PRI NI2 > > Hi, > > You're right about what Telus said, this is written in the form that I > received to get one but the tech at Group Telecom just respond to me in > and say that this is supposed to work with NI2 with that structure: > I 1C Standard Facility Length = 21 > > 9F Serv Discrim Networking Extensions > > PDU Component Begins (hex) > > 8B0100A10F020101... > > Also, in that post > http://lists.digium.com/pipermail/asterisk-users/2004-December/071501.ht ml > The guy seem to say that caller id name is working with NI-2.... > > When I was in line with the tech of GT, I have also tried with 5ess and > it wasn't working (sorry, no trace) > > Can you just past the url of your post about Telus? > > Thank you, > > LF > > > > > Quoting "Webster, Andrew" <[EMAIL PROTECTED]>: > > > > > Hi, > > > > I'm having a similar problem, but the name isn't even appearing in debug > > output of PRI (see my other post about this). My PRI is with Telus, and > > they told me that NI-2 doesn't support CallerID name function, only > > NI-1. > > > > > > Andrew > > > > > >> -----Original Message----- > >> From: [EMAIL PROTECTED] [mailto:asterisk-users- > >> [EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] > >> Sent: Wednesday, February 28, 2007 17:03 > >> To: asterisk-users@lists.digium.com > >> Subject: [asterisk-users] No Caller ID Name PRI NI2 > >> > >> I there, > >> > >> I have some trouble to do working caller id name for outgoing calls on > >> the PRI we just installed. Caller id name work on incoming calls only. > >> Caller id number work on incoming and outgoing calls. > >> > >> > >> The provider, Goup Telecom, said that's in what i'm sending. They said > >> that I send the cid name in ascii code and to do it working, I need to > >> send it in hex. > >> > >> So I take some traces but i'm unable to figure where is the problem. > >> > >> What I see In case that work: incoming call: > >> < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f > > 52 > >> 54 49 4e 20 46 41 58] > >> < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16, > >> 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ] > >> PROTOCOL 1F > >> > >> What I see in case that doesn't work: outgoing call: > >> > [28 05 b1 69 6e 66 6f] > >> > Display (len= 5) Charset: 31 [ info ]........ > >> > >> > >> completes traces: > >> > >> working: > >> < [ 02 01 da d6 08 02 02 34 05 04 03 80 90 a2 18 03 a9 83 81 1c 1c 9f > >> 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52 54 49 4e > > 20 > >> 46 41 58 1e 02 82 83 6c 0c 21 83 38 31 39 37 38 30 31 32 37 33 70 0b > > a1 > >> 38 31 39 33 34 30 30 39 37 37 ] > >> < Informational frame: > >> < SAPI: 00 C/R: 1 EA: 0 > >> < TEI: 000 EA: 1 > >> < N(S): 109 0: 0 > >> < N(R): 107 P: 0 > >> < 76 bytes of data > >> -- ACKing all packets from 106 to (but not including) 107 > >> -- Since there was nothing left, stopping T200 counter > >> -- Stopping T203 counter since we got an ACK > >> -- Nothing left, starting T203 counter > >> < Protocol Discriminator: Q.931 (8) len=76 > >> < Call Ref: len= 2 (reference 564/0x234) (Originator) > >> < Message type: SETUP (5) > >> < [04 03 80 90 a2] > >> < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > >> capability: Speech (0) > >> < Ext: 1 Trans mode/rate: 64kbps, > >> circuit-mode (16) > >> < Ext: 1 User information layer 1: u-Law > >> (34) > >> < [18 03 a9 83 81] > >> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 > >> Exclusive Dchan: 0 > >> < ChanSel: Reserved > >> < Ext: 1 Coding: 0 Number Specified Channel > > Type: > >> 3 > >> < Ext: 1 Channel: 1 ] > >> < [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f > > 52 > >> 54 49 4e 20 46 41 58] > >> < Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16, > >> 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ] > >> PROTOCOL 1F > >> 8B 0001 00 (CONTEXT SPECIFIC [11]) > >> A1 0016 (CONTEXT SPECIFIC [1]) > >> 02 0001 01 (INTEGER: 1) > >> 02 0001 00 (INTEGER: 0) > >> 80 000E 49 4E 46 4F 46 4F 52 54 49 4E 20 46 41 58 (CONTEXT SPECIFIC > > [0]) > >> < [1e 02 82 83] > >> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > >> (0) 0: 0 Location: Public network serving the local user (2) > >> < Ext: 1 Progress Description: Calling > >> equipment is non-ISDN. (3) ] > >> < [6c 0c 21 83 38 31 39 37 38 30 31 32 37 33] > >> < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: > >> ISDN/Telephony Numbering Plan (E.164/E.163) (1) > >> < Presentation: Presentation allowed of > >> network provided number (3) '8197801273' ] > >> < [70 0b a1 38 31 39 33 34 30 30 39 37 37] > >> < Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: > >> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8193400977' ] > >> -- Making new call for cr 564 > >> -- Processing Q.931 Call Setup > >> -- Processing IE 4 (cs0, Bearer Capability) > >> -- Processing IE 24 (cs0, Channel Identification) > >> -- Processing IE 28 (cs0, Facility) > >> Q.932 Interpretation component is not handled > >> Handle Q.932 ROSE Invoke component > >> [ Handling operation 0 ] > >> Handle Name display operation > >> Received caller name 'INFOFORTIN FAX' > >> -- Processing IE 30 (cs0, Progress Indicator) > >> -- Processing IE 108 (cs0, Calling Party Number) > >> -- Processing IE 112 (cs0, Called Party Number) > >> q931.c:3294 q931_receive: call 564 on channel 1 enters state 6 (Call > >> Present) > >> Sending Receiver Ready (110) > >> > [ 02 01 01 dc ] > >> > Supervisory frame: > >> > SAPI: 00 C/R: 1 EA: 0 > >> > TEI: 000 EA: 1 > >> > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > >> > N(R): 110 P/F: 0 > >> > 0 bytes of data > >> -- Restarting T203 counter > >> -- Restarting T203 counter > >> q931.c:2570 q931_call_proceeding: call 564 on channel 1 enters state 9 > >> (Incoming Call Proceeding) > >> > [ 00 01 d6 dc 08 02 82 34 02 18 03 a9 83 81 ] > >> > Informational frame: > >> > SAPI: 00 C/R: 0 EA: 0 > >> > TEI: 000 EA: 1 > >> > N(S): 107 0: 0 > >> > N(R): 110 P: 0 > >> > 10 bytes of data > >> -- Restarting T203 counter > >> Stopping T_203 timer > >> Starting T_200 timer > >> > Protocol Discriminator: Q.931 (8) len=10 > >> > Call Ref: len= 2 (reference 564/0x234) (Terminator) > >> > Message type: CALL PROCEEDING (2) > >> > [18 03 a9 83 81] > >> > >> > >> > >> don't working: > >> > >> -- Restarting T203 counter > >> Stopping T_203 timer > >> Starting T_200 timer > >> > Protocol Discriminator: Q.931 (8) len=54 > >> > Call Ref: len= 2 (reference 13/0xD) (Originator) > >> > Message type: SETUP (5) > >> > [04 03 80 90 a2] > >> > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > >> > capability: Speech (0) > >> > Ext: 1 Trans mode/rate: 64kbps, > >> > circuit-mode (16) > >> > Ext: 1 User information layer 1: u-Law > >> (34) > >> > [18 03 a9 83 81] > >> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 > >> > Exclusive Dchan: 0 > >> > ChanSel: Reserved > >> > Ext: 1 Coding: 0 Number Specified Channel > > Type: > >> 3 > >> > Ext: 1 Channel: 1 ] > >> > [1e 02 80 83] > >> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard > >> > (0) 0: 0 Location: User (0) > >> > Ext: 1 Progress Description: Calling > >> > equipment is non-ISDN. (3) ] > >> > [28 05 b1 69 6e 66 6f] > >> > Display (len= 5) Charset: 31 [ info ] > >> > [6c 0d 21 80 31 38 31 39 33 34 30 33 31 32 38] > >> > Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI: > >> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > >> > Presentation: Presentation permitted, user > >> > number not screened (0) '18193403128' ] > >> > [70 0b a1 38 31 39 35 37 33 30 39 31 33] > >> > Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: > >> > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8195730913' ] > >> q931.c:2879 q931_setup: call 32781 on channel 1 enters state 1 (Call > >> Initiated) > >> > >> > >> Anyone had suggestion/comment welcome. > >> > >> Thank you ad advance, > >> > >> Loic > >> > >> > >> _______________________________________________ > >> --Bandwidth and Colocation provided by Easynews.com -- > >> > >> asterisk-users mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users