---------- Forwarded message ----------
From: Benito Camelas <[EMAIL PROTECTED]>
Date: Wed, 28 Feb 2007 11:21:52 +0100
Subject: Problem with TE212P
To: [email protected]
Hello.
I have a TE212 configured in E1 mode.
This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured):
cat /proc/zaptel/2
Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN
25 TE2/0/1/1 Clear
26 TE2/0/1/2 Clear
27 TE2/0/1/3 Clear
28 TE2/0/1/4 Clear
29 TE2/0/1/5 Clear
30 TE2/0/1/6 Clear
31 TE2/0/1/7 Clear
32 TE2/0/1/8 Clear
33 TE2/0/1/9 Clear
34 TE2/0/1/10 Clear
35 TE2/0/1/11 Clear
36 TE2/0/1/12 Clear
37 TE2/0/1/13 Clear
38 TE2/0/1/14 Clear
39 TE2/0/1/15 Clear
40 TE2/0/1/16 HDLCFCS
41 TE2/0/1/17 Clear
42 TE2/0/1/18 Clear
43 TE2/0/1/19 Clear
44 TE2/0/1/20 Clear
45 TE2/0/1/21 Clear
46 TE2/0/1/22 Clear
47 TE2/0/1/23 Clear
48 TE2/0/1/24 Clear
49 TE2/0/1/25 Clear
50 TE2/0/1/26 Clear
51 TE2/0/1/27 Clear
52 TE2/0/1/28 Clear
53 TE2/0/1/29 Clear
54 TE2/0/1/30 Clear
55 TE2/0/1/31 Clear
cat /proc/zaptel/3
Span 3: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
56 TE2/0/2/1 Clear
57 TE2/0/2/2 Clear
58 TE2/0/2/3 Clear
59 TE2/0/2/4 Clear
60 TE2/0/2/5 Clear
61 TE2/0/2/6 Clear
62 TE2/0/2/7 Clear
63 TE2/0/2/8 Clear
64 TE2/0/2/9 Clear
65 TE2/0/2/10 Clear
66 TE2/0/2/11 Clear
67 TE2/0/2/12 Clear
68 TE2/0/2/13 Clear
69 TE2/0/2/14 Clear
70 TE2/0/2/15 Clear
71 TE2/0/2/16 HDLCFCS
72 TE2/0/2/17 Clear
73 TE2/0/2/18 Clear
74 TE2/0/2/19 Clear
75 TE2/0/2/20 Clear
76 TE2/0/2/21 Clear
77 TE2/0/2/22 Clear
78 TE2/0/2/23 Clear
79 TE2/0/2/24 Clear
80 TE2/0/2/25 Clear
81 TE2/0/2/26 Clear
82 TE2/0/2/27 Clear
83 TE2/0/2/28 Clear
84 TE2/0/2/29 Clear
85 TE2/0/2/30 Clear
86 TE2/0/2/31 Clear
Before I do load the modules the leds are ligthing.
But after a ztcfg -v the led of the second span is off.
First I do insmod wct4xxp and after ztcfg -vv.
The zaptel.conf file is like this:
#
#zaptel.conf
#
fxsks=1-24
span=1,0,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4
bchan=25-39,41-55
dchan=40
bchan=56-70,72-86
dchan=71
loadzone=nl
defaultzone=nl
(I have an TDM24P too, it works ok).
In this moment the led of the first span of the TE212P is in RED (if
no cable connected) or in GREEN (if a cable is conected), but the led
of the second span is off.
This is shown in a pri show span in the CLI (with no cable connected):
pri show span 2
Primary D-channel: 40
Status: Provisioned, In Alarm, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
*CLI> pri show span 3
Primary D-channel: 71
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3
If anybody knows what'ś the problem I'll be very pleasent for your help.
Best Regards,
Benito
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
