Hi, all,
I am using Asterisk 1.2.15 with an OpenLine4 card (vpb-driver 4.0). And
Asterisk segfaults. Here is the
output of loading chan_vpb. Very detailed because I turned on vpb
verbose. any lead to solution will be
appreciated. Thanks
output from Asterisk:
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
[chan_vpb.so] => (VoiceTronix V6PCI/V12PCI/V4PCI API Support)
== Parsing '/etc/asterisk/vpb.conf': Found
Mar 6 15:22:00 NOTICE[12913]: chan_vpb.c:2809 int load_module(): VPB
Driver configured to use [1] cards
We have a valid config file combination...
Number of OpenPri cards: 0
Number of OpenSwitch cards: 0
Number of OpenLine cards: 1
Number of vtcore cards: 0
Sum Total number of Cards: 1
number of cards [1]
Card Number = 0 Model = 2 (from config file)
defRecordGain=6.000000
defPlayGain=7.000000
Initialies VPB Registry, located [1] boards
Initializing board[0][0] model[2]
About to load firmware...
DSP [00] Memory test passed OK...
[0]: .dspint flags: 0x0040 addr: 0x0000 length: 0x00a8 .
[1]: .text flags: 0x0020 addr: 0x0200 length: 0x61ec .
[2]: .cinit flags: 0x0050 addr: 0x0200 length: 0x0320
...........................
[3]: .switch flags: 0x0040 addr: 0x63ec length: 0x00ac .
[4]: .ebss flags: 0x0080 addr: 0x6600 length: 0x007f
[5]: .data flags: 0x0040 addr: 0x667f length: 0x02ef .
[6]: .bss flags: 0x1080 addr: 0x6980 length: 0x0426
[7]: .const flags: 0x0040 addr: 0x6da6 length: 0x0bc1 .
[8]: .stack flags: 0x0080 addr: 0x7b00 length: 0x0c00
[9]: .sysmem flags: 0x0080 addr: 0x8700 length: 0x7800
[10]: .b0data flags: 0x0080 addr: 0x0100 length: 0x0090
[11]: .b0prog flags: 0x0080 addr: 0xfe00 length: 0x0090
[12]: .b1data flags: 0x0080 addr: 0x0300 length: 0x0090
[13]: .B1 flags: 0x0080 addr: 0x0300 length: 0x0174
[14]: .b2data flags: 0x0000 addr: 0x0060 length: 0x0000
[15]: .B2 flags: 0x0080 addr: 0x0060 length: 0x0017
[16]: .init flags: 0x0040 addr: 0x0000 length: 0x0000
Entry point: 0x0200
DSP [00] code downloaded OK....
About to run...
DSP running...
model = 0 vr[i].model = 2
DSP [00] Message FIFOs booted OK
Generic_pci_block_eeread: data [0xbffc9fb8]
Configuring [1] VPBs...
Opening Tone detector for [4] channels...
Configuring each channel device...
dev: 0 :Down channel objects, obj:11
dev: 0 :call Progress state machines
dev: 1 :Down channel objects, obj:31
dev: 1 :call Progress state machines
dev: 2 :Down channel objects, obj:51
dev: 2 :call Progress state machines
dev: 3 :Down channel objects, obj:71
dev: 3 :call Progress state machines
Starting config manager for board [0]..
Taking a nap to let the board start up....
override default prog tones from reg
VPBs configured OK!
Opening PlayRec module...
playrec.cpp: setting V20.03 & > hyb bals on OL
playrec.cpp: setting V20.03 & > hyb bals on OL
playrec.cpp: setting V20.03 & > hyb bals on OL
playrec.cpp: setting V20.03 & > hyb bals on OL
Starting loop sense thread monitoring on [4] channels
Loop Sense Thread started OK!
timer callback started OK!
Driver initialised OK!
Segmentation fault
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<,
--
/*
* Yifan Zhang
*
* Softsound
* +44 (0)1223 448 021
*/
"Vim is the best editor in the world!" - C Programmer
"With Cream, it is even better!" - C Programmer programming in Java
The information contained in this message is for the intended addressee only
and may contain confidential and/or privileged information. If you are not
the intended addressee, please delete this message and notify the sender, and
do not copy or distribute this message or disclose its contents to anyone. Any
views or opinions expressed in this message are those of the author and do not
necessarily represent those of Autonomy Systems Limited or of any of its
associated companies. No reliance may be placed on this message without
written confirmation from an authorised representative of the company.
Autonomy Systems Limited, Registered Office: Cambridge Business Park, Cowley
Road, Cambridge CB3 0WZ, Registered Number 03063054.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
