I think it has something to do with hints...I can't seem to subscribe to
anything now with 1.4 vs 1.2, even with a normal non SLA setup.
My phone/config that works with 1.2, so I know hints work with the phone
and firmware and with NAT at least on 1.2.
I did a fresh 1.4 install (and I did a "make samples" so I had something
to work off of)
"sip show subscriptions" shows 0 active
"show hints":
[EMAIL PROTECTED] : SIP/2404366402 State:Idle
Watchers 0
If I run the default demo app, show hints still shows Idle.
My "Buddies" key in the Polycom, which is watching the proper sip hint
(works in 1.2) shows the extension to be Offline.
Sip.conf
[general]
allowsubscribe=yes
subscribecontext=default
notifyringing=yes
notifyhold=yes
limitonpeers=yes
(I tried with and without the above values commented out, as well as
specifically in my device peer definition)
[2404366402]
type=friend
secret=blahededah
nat=yes
host=dynamic
canreinvite=no
context=default
qualify=yes
extensions.conf
[default]
exten => 2404366402,hint,SIP/2404366402
...etc...
My mac-directory.xml
..snip...
<item>
<ln>myself</ln>
<fn></fn>
<ct>2404366402</ct>
<sd></sd>
<rt></rt>
<dc/>
<ad>0</ad>
<ar>0</ar>
<bw>1</bw>
<bb>0</bb>
</item>
...snip...
I also tried in the <ct>[EMAIL PROTECTED]</ct>
Let's pretend 1.1.1.1 is my firewall that the Polycom is behind
2.2.2.2 is my 1.4.1 test Asterisk server
<--- SIP read from 1.1.1.1:60671 --->
SUBSCRIBE sip:[EMAIL PROTECTED]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.116;branch=z9hG4bK256e271aEC1CEA7B
From: "Line 1" <sip:[EMAIL PROTECTED]>;tag=447AE7-653FB66C
To: <sip:[EMAIL PROTECTED]>
CSeq: 1 SUBSCRIBE
Call-ID: [EMAIL PROTECTED]
Contact: <sip:[EMAIL PROTECTED]>
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE,
NOTIFY, PRACK, UPDATE, REFER
Event: presence
User-Agent: PolycomSoundPointIP-SPIP_430-UA/1.6.7.0094
Max-Forwards: 70
Expires: 3600
Content-Length: 0
<------------->
--- (13 headers 0 lines) ---
Creating new subscription
Sending to 192.168.1.116 : 5060 (no NAT)
Found peer '2404366402'
<--- Transmitting (NAT) to 1.1.1.1:60671 --->
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP
192.168.1.116;branch=z9hG4bK256e271aEC1CEA7B;received=1.1.1.1
From: "Line 1" <sip:[EMAIL PROTECTED]>;tag=447AE7-653FB66C
To: <sip:[EMAIL PROTECTED]>;tag=as3123a96d
Call-ID: [EMAIL PROTECTED]
CSeq: 1 SUBSCRIBE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
nonce="7a544b2b"
Content-Length: 0
<--- SIP read from 1.1.1.1:60671 --->
SUBSCRIBE sip:[EMAIL PROTECTED]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.116;branch=z9hG4bK3f8d777548EC8ED2
From: "Line 1" <sip:[EMAIL PROTECTED]>;tag=447AE7-653FB66C
To: <sip:[EMAIL PROTECTED]>
CSeq: 2 SUBSCRIBE
Call-ID: [EMAIL PROTECTED]
Contact: <sip:[EMAIL PROTECTED]>
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE,
NOTIFY, PRACK, UPDATE, REFER
Event: presence
User-Agent: PolycomSoundPointIP-SPIP_430-UA/1.6.7.0094
Authorization: Digest username="2404366402", realm="asterisk",
nonce="7a544b2b", uri="sip:[EMAIL PROTECTED]:5060",
response="404b224f5abbdc3793d4df45ee2ffa59", algorithm=MD5
Max-Forwards: 70
Expires: 3600
Content-Length: 0
<------------->
--- (14 headers 0 lines) ---
Creating new subscription
Sending to 1.1.1.1 : 60671 (NAT)
Found peer '2404366402'
Looking for 2404366402 in default (domain 2.2.2.2)
<--- Transmitting (NAT) to 1.1.1.1:60671 --->
SIP/2.0 404 Not Found
Via: SIP/2.0/UDP
192.168.1.116;branch=z9hG4bK3f8d777548EC8ED2;received=1.1.1.1
From: "Line 1" <sip:[EMAIL PROTECTED]>;tag=447AE7-653FB66C
To: <sip:[EMAIL PROTECTED]>;tag=as3123a96d
Call-ID: [EMAIL PROTECTED]
CSeq: 2 SUBSCRIBE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Content-Length: 0
Bill
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Russell
Bryant
Sent: Tuesday, March 06, 2007 1:35 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] 1.4 - SLA
Bill Gibbs wrote:
> I have been using 2 Polycom 430s so far. I can get incoming calls
just
> fine (both phones ring on line 1). However it doesn't appear to seize
> the line, so if a call is on the one phone, I can still pick up line 1
> on the other and dial - and it's reflected in the connected call. I
> assume that's related to the hint/subscription issue Lacy indicated as
> well. "sip show subscriptions" shows nothing.
If you see no subscriptions, then the phones will not dispaly the state
of the line at all.
In regards to still allowing you to dial when all lines are busy, do you
have your phones set up to automatically dial when you go off-hook? In
this SLA setup, you should not allow any dialing on the phone before a
call is made. If the phone is taken off hook without pressing a
specific line button, the phone should immediately dial the "station1"
(or whatever the station is named) extension. This will connect the
station to the first available trunk if there is one, and then provide
dialtone for making a call.
--
Russell Bryant
Software Engineer
Digium, Inc.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
